If the plastic nubs protrude they can prevent the cartridge from seating properly. Make sure these are flush with the cartridge body, if not carefully trim them flush. There are four orange plastic spots, left over from the protective cap. If you see it Click on it and click Remove at the bottom.
#Hp photosmart 7525 ink type drivers#
(Note: there is a space in between printui.exe and /s) Click on the Drivers tab. Turn it over and examine the area around the ink port. Open up the run command with the Windows key + R key combo. If the standard troubleshooting did not resolve black not printing I would suggest removing the black cartridge. If photo paper were selected the printer would use the (empty) color cartridges to print even the black portions of a document. The black cartridge uses pigmented ink which is not compatible with photo paper. One other thing to check - make sure you have selected "plain paper" as the media type in the driver. Continue on, and make sure the vents are clear, and also soak the printhead as described in the later steps if the solution is not reached before that. I would suggest going through the troubleshooting steps in the document I gave above, ignore the low ink indications for the color cartridges and proceed past the steps about replacing low cartridges. It is likely that even replacing the color cartridges at this point might not resolve color printing without soaking the printhead.)
(Note that running the printer without ink in the color cartridges will probably result in the color portion of the printhead being clogged.
Some printers with this design would block printing if ink were out in one or more colors, but this would show up on the printer as an error message if it were the case for this printer. The Photosmart 7525 has separate ink cartridges and printhead.
#Hp photosmart 7525 ink type upgrade#
Notebook Hardware and Upgrade Questions.
0 kommentar(er)
